JVC GY-HM850CHE Instructions Manual Download

Page: 120 / 220

LCD/VF Menu

Item for specifying settings related to the LCD

monitor or viewfinder screen.

This menu screen can be used to specify settings

related to the Focus Assist mode, zebra pattern

display, screen size, marker, and safety zone. In

addition, it is also used for selecting whether to

display characters on the LCD monitor or

viewfinder screen, as well as for adjusting the

picture quality of the LCD monitor.

Shooting Assist...

Menu for setting the Shooting Assist function.

(

P121 [Shooting Assist Item] )

Marker Settings...

For setting items such as the safety zone and

center mark.

(

P121 [Marker Settings Item] )

Display Settings...

For specifying display-related settings.

(

P122 [Display Settings Item] )

LCD + VF

For selecting a method to switch between the LCD

monitor and viewfinder screen displays.

(

P38 [Adjusting the LCD Monitor and

Viewfinder] )

On:

Displays images on the viewfinder at all times.

Off:

Turns off the viewfinder screen display when the

LCD monitor is turned on.

[Setting Values: On,

Off]

Memo :

When [Network] is set to “On”, this item is fixed

at “Off” and cannot be selected.

LCD/VF Display

For selecting the angle of view for displaying the

image in the LCD monitor and viewfinder.

Wide: Displays images in the full angle of view

of the 16:9 recording format on both the LCD

monitor and viewfinder.

The entire angle of view is displayed, so the

image appears slightly vertically-long.

Normal: Displays images in an angle of view

equivalent to the 15:9 format on the LCD

monitor, and an angle of view equivalent to the

16:9 format on the viewfinder.

(The image displayed on the LCD monitor

appears slightly cropped at the left and right

sides compared to the actual recorded image.)

[Setting Values: Wide,

Normal]

VF Color

For selecting whether to display the image on the

viewfinder screen in color or black-and-white.

Select “On” to display in color, and “Off” to display

in black-and-white.

[Setting Values:

On, Off]

Memo :

The setting of this item is valid only in Camera

mode.

When this item is set to “Off”, only the captured

images are displayed in black-and-white. The

display and menu screens are displayed in

color.

VF Contrast

For setting the difference in luminance between the

darkest and brightness areas in the viewfinder

screen.

Increasing the value increases the contrast.

[Setting Values: -10 to +10 (

0)]

LCD Contrast

For setting the difference in luminance between the

darkest and brightness areas in the LCD monitor.

Increasing the value increases the contrast.

[Setting Values: -10 to +10 (

0)]

LCD Backlight

For setting the brightness of the LCD monitor

backlight.

[Setting Values: Bright,

Normal]

LCD Mirror

For specifying the image display method when

facing the LCD monitor.

Select “Mirror” to display the image after laterally

inverting it. (Mirror display)

(

P38 [Adjusting the LCD Monitor and

Viewfinder] )

[Setting Values: Mirror,

Normal]

Memo :

The setting of this item is valid only in Camera

mode.

During display of the color bar, the “Mirror”

setting is disabled.

(

P155 [Color Bar Output] )

During display of the return video, the “Mirror”

setting is disabled.

(

P172 [Displaying Return Videos from an

External Device

] )

120

LCD/VF Menu

Menu

Display and

etailed

etti
ngs

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands