Memo :
0
The built-in time code generator will continue
operation even when the master device is
disconnected after synchronization.
0
User’s bit will become data in the master device.
0
While the [TC] terminal is connected, the time
code may be out of synchronization when the
[A/V Set]
B
[Video Set]
B
[HDMI/SDI Out]
setting of the Master device and Slave device is
being changed.
Setting Zebra Pattern
When the luminance level range for displaying
zebra patterns is specified, diagonal lines (zebra
pattern) are displayed at areas with the specified
luminance levels during shooting.
.
1
Set the zebra display pattern.
Select the display pattern in [LCD/VF]
B
[Shooting Assist]
B
[Zebra].
.
Zebra 2 Display
Example
Zebra 1 Display
Example
2
Specify the brightness (luminance) level
range for displaying zebra pattern.
Set the maximum brightness limit in [LCD/VF]
B
[Shooting Assist]
B
[Zebra]
B
[Top 1]/[Top
2], and the minimum brightness limit in [Bottom
1]/[Bottom 2].
Item
Settings
Options
Top 1
Maximum
brightness limit for
displaying Zebra 1
5% - 100%, Over
(in 5 % increments)
Bottom 1 Minimum
brightness limit for
displaying Zebra 1
0% - 100% (in 5 %
increments)
Top 2
Maximum
brightness limit for
displaying Zebra 2
5% - 100%, Over
(in 5 % increments)
Bottom 2 Minimum
brightness limit for
displaying Zebra 2
0% - 100% (in 5 %
increments)
Memo :
0
When [Zebra] is set to “1Pattern”, “Top 2” and
“Bottom 2” cannot be selected.
0
If the area specified by two zebra patterns
overlaps, the zebra patterns will also appear
overlapped, forming a grid-like display.
.
3
Display the zebra pattern.
Press the [7/
H
/ZEBRA] button to display the
zebra pattern in the specified range.
.
Memo :
0
“Zebra” is assigned to the [7/
H
/ZEBRA] buttons
in the factory default.
0
“Zebra” can also be assigned to other user
buttons.
P42 [Assignment of Functions to User
Synchronizing the Time Code with an External Time Code Generator
79
Sh
ooting
Summary of Contents for GY-HM850CHE
Page 2: ...2 ...
Page 219: ...219 ...