JVC GY-HM850CHE Page 100 Instructions Manual Download

Page: 100 / 220

During Playback or Pause Screen

Press [OIS/1] button during clip playback.

If the clip does not have an OK mark, an OK

mark will be appended.

If the clip is appended with an OK mark, the

OK mark will be deleted.

1000/2000

12:34:56

Jan 24,2014

00:00:00.00

60i

1920x1080

16.4V

2/4

XHQ

OK Mark

Memo :

The clip pauses when an OK mark is appended

or deleted during playback.

Appending/Deleting OK Mark of

Multiple Clips

To select and append/delete OK mark for multiple

clips, refer to “[Selecting and Performing

Operations on Multiple Clips] P 100”.

Selecting and Performing

Operations on Multiple

Clips

Multiple clips can be selected during thumbnail

screen or playback screen display.

After selecting multiple clips, perform

appending/deleting of OK mark, deleting of clips

using the action selection screen.

After selecting multiple clips, the selections will

be canceled by the following operations.

When [Deselect All] in the action menu is

selected

When exiting Media mode from the thumbnail

screen

When removing the SD card

When switching the slot in use

Selecting Multiple Clips Randomly

Move the cursor to a clip without a check

mark, and press the [MARKER/2] button.

A green check mark appears on the clip.

100

Appending/Deleting OK Mark

Playback

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands