JVC GY-HM850CHE, Instructions Manual

Page: 62 / 220

Automatic Shutter Mode (Automatic
Shutter Adjustment)
1
Set the [FULL AUTO] switch to “ON” to set
to the Auto Shutter mode.
0
The
a
icon appears on the screen.
0
The camera recorder enters the Auto Shutter
mode. The shutter speed is automatically
adjusted according to the brightness of the
subject.
Switching of shutter speed with the cross-
shaped button (
JK
) and switching of shutter
mode with the Set button (
R
) are disabled.
Memo :
0
You can set the controllable range for the
Automatic Shutter in [Main Menu]
B
[Camera
Function]
B
[EEI Limit].
(
A
P109 [ EEI Limit ] )
0
When [Camera Function]
B
[FULL AUTO]
B
[Shutter] is set to “SW Set”, the shutter mode can
be adjusted using the Set button (
R
), and the
shutter speed can be altered using the cross-
shaped buttons (
JK
) even when the [FULL
AUTO] switch on the camera body is set to
“ON”.
0
Setting [Camera Function]
B
[FULL AUTO]
B
[Shutter] to “EEI” switches the camera recorder
to the Automatic Shutter Adjustment mode. In
this case, adjustment of the shutter mode using
the Set button (
R
), and adjustment of the shutter
speed with the cross-shaped buttons (
JK
) will
be disabled.
(
A
P113 [ Shutter ] )
0
You can also switch to the Auto Shutter mode by
setting [Camera Function]
B
[Shutter] to “EEI”.
(
A
P108 [ Shutter ] )
Setting the ND Filter
Use the ND filter to keep the lens aperture in the
appropriate range.
Switch according to the brightness of the object.
When the position on the switch is changed, the
selected position of the ND filter is displayed on the
LCD monitor and viewfinder screen.
(Display 2 screen)
Memo :
0
When [Main Menu]
B
[LCD/VF]
B
[Display
Settings]
B
[ND Filter] is set to “Off”, the position
of the ND filter will not be displayed.
(
A
P122 [ ND Filter ] )
.
ND FILTER
1/64
1/16
1/4
OFF
.
P 13000K 1/ 100
F1. 6
0 dB
AE + 6
ND 1 /64
12 :34 : 56
Jan 24 , 2014
00: 00: 00.00
5 . 6f t
ND 1 /64
Memo :
0
It is recommended to use the ND filter to set the
lens aperture to less than F8.
ND Filter Warning Display
In order to adjust the amount of light when you are
shooting at a relatively bright location, the diameter
of the iris may become extremely small, causing
blurry effects to occur as a result.
This phenomenon is known as “small aperture
diffraction”. You can make appropriate use of ND
filters to prevent it from occurring.
This unit displays an ND filter warning when
necessary to prompt you to select an appropriate
ND filter.
1
Set [Main Menu]
B
[LCD/VF]
B
[Display
Settings]
B
[ND Filter] to “On+Assist”.
(
A
P122 [ ND Filter ] )
2 When the iris diameter becomes too small
while adjusting the light intensity, or when
an ND filter is used in a dimly-lit location,
the ND filter display starts blinking.
62
Setting the Electronic Shutter
Sh
ooting