JVC GY-HM850CHE Instructions Manual Download

Page: 122 / 220

Aspect Ratio

For selecting the final image aspect ratio to be used

from the overall angle of view.

[Setting Values: 16:9(+4:3), 2.35:1,

16:9, 1.75:1,

1.66:1, 14:9, 13:9, 4:3, 2.35:1 Center, 2.35:1 Top,

1.85:1 Center, 1.85:1 Top]
Memo :

When [Grid Marker] is set to “On”, this item

appears as “---” and cannot be selected.

When [System]

[Record Set]

[Record

Format]

[SD Aspect] is set to “4:3”, this item

is fixed at “4:3” and cannot be selected.

(

P135 [ SD Aspect ] )

Aspect Marker

For specifying how boundary markers are to be

used to indicate the parts of an image that are

beyond the range of the aspect ratio selected in

[Aspect Ratio].

Line+Halftone:

Displays the boundary using lines, and areas

outside the boundary in halftone.

Halftone:

Displays areas outside the boundary in halftone.

Line:

Displays the boundary using lines.

Off:

Hides the boundary markers.

[Setting Values: Line+Halftone, Halftone, Line,

Off]

Memo :

When [Grid Marker] is set to “On”, this item

appears as “---” and cannot be selected.

When [Aspect Ratio] is set to “16:9” or

“16:9(+4:3)”, this item is fixed at “Off” and cannot

be selected.

Safety Zone

For setting the percentage of area that is to be

deemed as valid area (Safety Zone) within the

boundary of the aspect ratio selected in [Aspect

Ratio].

[Setting Values: 95%, 93%, 90%, 88%, 80%,

Off]

Memo :

When [Grid Marker] is set to “On”, this item

appears as “---” and cannot be selected.

Center Mark

For specifying whether to display a mark to indicate

the screen center within the aspect ratio selected

in [Aspect Ratio].

[Setting Values:

On, Off]

Display Settings Item

This menu is used to set the displays on the LCD

monitor and viewfinder screen.

Zoom

For setting the display method of the zoom

position.

Number:

Displays the zoom position in numbers (0-99).

Bar:

Displays the zoom position in a bar.

Off:

Does not display the zoom position.

[Setting Values: Number,

Bar, Off]

* If the lens attached does not support zoom

position information, “Off” is displayed and

selection is disabled.

Focus

For setting the display method of the focal length

during manual focus.

Feet:

Displays the focus in feet.

Meter:

Displays the focus in meters.

Off:

Does not display the focal length during focus.

[Setting Values: Feet,

Meter, Off]

* If the lens attached does not support focus

position information, “Off” is displayed and

selection is disabled.

ND Filter

For setting whether to display the filter position.

On+Assist:

Displays the current filter position.

If the ND filter setting is inappropriate, the

appropriate ND filter to select will appear

blinking.

On:

Displays the current filter position.

Off:

Hides the filter position.

[Setting Values: On+Assist,

On, Off]

Record Format

For setting whether to display the video format

during recording or playback.

[Setting Values:

On, Off]

122

LCD/VF Menu

Menu

Display and

etailed

etti
ngs

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands