JVC GY-HM850CHE Instructions Manual Download

Page: 160 / 220

Managing/Editing Clips on

a PC

Loading Clips to the PC (USB

Connection Mode)

You can load clips to a PC by connecting the

camera recorder to the PC via the USB port.

Doing so enables clips stored in the SD card to

be managed and edited on the PC.

Files on the SD card can be managed/edited on

the connected PC in this mode only for USB

mass storage class devices that are recognized

by the said PC as a peripheral drive.

Memo :

Files cannot be written to the SD card.

Make sure to manage/edit files recorded in the

MP4 file format using the (JVC ProHD Clip

Manager) PC application software in the

supplied disc.

For details on how to install the application

software, refer to the [User's Guide] of the [JVC

ProHD Clip Manager] inside the supplied disc.

Connect the camera recorder to the PC

using a USB cable.

A confirmation message “Change to USB

Mode?” to enable the USB connection appears.

Select [Change] using the cross-shaped

button (

), and press the Set button (

The camera recorder switches to USB mode.

Cancel

Change

Change to USB Mode?

Memo :

If recording is in progress, the “Change to USB

Mode?” message appears after recording

stops.

If playback is in progress, the camera recorder

switches to USB mode after the file closes

automatically, such as when playback stops.

Disconnecting

Disable the connection on the PC, then remove

the USB cable from the camera recorder.

Doing so exits the USB mode and switches the

camera recorder to Camera mode.

Memo :

The procedure for disabling the USB connection

varies according to the PC in use. For details,

refer to the instruction manual of the PC.

160

Managing/Editing Clips on a PC

Con
nectin

g Externa

l Devices

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands