JVC GY-HM850CHE Instructions Manual Download

Page: 31 / 220

Built-In Battery

The date/time and time code data are stored

using the built-in rechargeable battery.

When power is connected to the camera

recorder, the built-in battery always gets

charged. When the power is disconnected, the

battery gradually discharges.

The battery will be totally discharged if left

unused for 3 months and the date/time and time

code data will be reset. When this happens, set

the [POWER ON/OFF] switch to “ON” to display

the [Initial Setting] screen, then set the date/

time.

(

P34 [Initial Settings] )

Using a Battery Pack

Recommended Batteries

U model : Dionic90 (Anton/Bauer)

E model : Endura-HL9 (IDX)
* Models with an E suffix are for the European

market and the UL Listing mark is not applicable.

Caution :

Make use of the recommended batteries. Heavy

batteries may fall off if not used correctly.

For details on how to charge the battery, please

refer to the [instruction manual] of the battery in

use.

Battery Operating Time

The following are the approximate times for

continuous operation on fully-charged batteries.

Battery

Continuous Recording

Time (At 25 °C)

Dionic90 (U model) Approx. 2.8 h
Endura-HL9 (E

model)

Approx. 2.7 h

Memo :

Actual operating times may differ depending on

the age of the battery, charging condition, and

operating environment.

Operating time is shortened in cold

environment.

The operating time may shorten when power

zoom is used, accessories are connected, or

when the LCD monitor is frequently used.

Precautions for the Battery Operation

Do not remove the battery when the [POWER

ON/OFF] switch is “ON”.

Do not insert or remove the DC cable when the

battery is in use.

Leaving the camera recorder unused with the

battery inside will deplete the battery power

even if you set the [POWER ON/OFF] switch to

“OFF”. Remove the battery if you are not using

the camera recorder.

Attaching/Detaching the Battery (U Model)

Use the Dionic90 (Anton/Bauer) battery.

Align the battery guide pins (x3) with the

battery adapter guide hole, and insert them

directly.

Guide Pins

Guide Hole (x3)

Slide the battery in the direction indicated

by the arrow until a “click” sound is heard.

Memo :

If the guide pins are not inserted straight, the

battery will not be attached correctly.

Detaching the Battery

Press down the release lever and slide the

battery toward you to detach it from the camera

recorder.

Battery

Release Lever

Power Supply

ati

ons

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands