JVC GY-HM850CHE Instructions Manual Download

Page: 46 / 220

Formatting is complete.

When formatting is complete, “Complete” appears

and the camera recorder returns to the [Format

Media] screen.
Memo :

During formatting, menu operation is

unavailable but you can start recording.

However, this is only available when a

recordable SD card is inserted in the other slot.

Formatting cannot be performed in the following

cases.

Recording is in progress on the SD card to be

formatted.

SD card is not inserted.

Write-protect switch of the SD card is set (

is displayed).

Caution :

If you format the SD card, all data recorded on

the card, including video data and setup files,

will be deleted.

Restoring and Updating the SD Card

It is necessary to restore the SD card if an

abnormality occurs to the data in the card due to

some reasons.
Memo :

[!RESTORE] appears at the remaining media

display area when an SD card that requires

restoring is inserted.

Executing this function while [!RESTORE] is not

displayed updates the data inside the SD card.

Select [System]

[Media]

[Restore

Media].

(

P130 [ Restore Media ] )

Select the SD card to be restored and press

the Set button (

Set

Restore Slot

Restore Media

Restoring starts.

Restoring...

Restoring is complete.

When restoring is complete, “Complete”

appears and the camera recorder returns to the

[Restore Media] screen.

When no media that requires restoring is

inserted, the camera recorder returns to the

[Media] menu screen.

Caution :

[Restore Media] can only be selected in Camera

mode. However, it cannot be selected while the

camera recorder is recording. Select [Restore

Media] in Camera mode when the camera

recorder is not recording.

[Restore Media] does not restore the SD card to

its original states completely. If restoring fails,

replace or format the SD card. Take note that

formatting erases all the information inside the

SD card.

Restoring cannot be performed in the following

cases.

Camera recorder is recording in progress.

SD card is not inserted.

Write-protect switch of the SD card is set (

is displayed).

SD Card

ati

ons

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands