JVC GY-HM850CHE Instructions Manual Download

Page: 88 / 220

Start normal recording (normal recording

into slot A)

Press any of the [REC] buttons.

Recording into the media in slot A starts.

(The characters “

REC” appear in red.)

The card icon of slot A turns red (unselected

state), and the status indicator of slot A blinks

in red.

13000K

1/ 100

F1. 6

ND 1 /64

12 :34 : 56

Jan 24 , 2014

00: 00: 00.00

5 . 6f t

100min

50min

100min

50min

Red (not selected)

Stop normal recording.

Press any of the [REC] buttons again.

Recording to slot A stops, and the card slot

mark of slot A turns white (unselected state).

The characters “

REC” (red) changes back

to “STBY” (white).

The status indicator of slot A goes out.

13000K

1/ 100

F1. 6

ND 1 /64

12 :34 : 56

Jan 24 , 2014

00: 00: 00.00

5 . 6f t

100min

50min

100min

50min

White (not selected)

Stop backup recording.

Select [STBY] in [Main Menu]

[System]

[Record Set]

[Slot Mode]

[Backup

Rec] and press the Set button (

(

P136 [ Slot Mode ] )

You can also press the user button that is

assigned with “Backup Trig”.

(

P111 [User Switch Set Item] )

Recording to slot B stops, and the card slot

mark of slot B turns white (unselected state).

The characters “BACKUP” changes back to

white.

The status indicator of slot B lights up in

green.

13000K

1/ 100

F1. 6

ND 1 /64

12 :34 : 56

Jan 24 , 2014

00: 00: 00.00

5 . 6f t

100min

50min

100min

50min

White

Memo :

During backup recording, if the space of one

card runs out, recording stops only for the card

that is full.

When recording to both slots is stopped,

recording in the Regen mode will be enabled for

the card slot in which recording started.

When recording is started in the other slot while

recording to one slot, the clip being recorded is

split and simultaneous recording to the other

card starts.

When recording is stopped for either slot A or B

while recording to both slots, the clip on the slot

which is still recording is split.

Although the clips are separated during

recording the clips can be seamlessly joined by

arranging them on the timeline of the editing

software since they are recorded seamlessly.

Clip Cutter Trig cannot be performed during

backup recording.

(

P85 [Splitting the Clips Freely (Clip Cutter

Trig)] )

When [Slot Mode] is set to “Backup”, [Rec

Mode] can only be set to “Normal”.

(

P135 [ Rec Mode ] )

Backup Rec

ooting

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands