JVC GY-HM850CHE Instructions Manual Download

Page: 146 / 220

Operation Lock Icon

Appears when the operation lock feature is

turned on.

(

P48 [About the Operation Lock Feature] )

Voltage/Battery Power

Displays the current status of the power supply

in use.

(

P32 [Power Status Display] )

Memo :

Displayed in the Display 0 and Display 1 screens

during warnings only.

Remaining Space on Media

Displays the remaining recording time of the SD

cards in slot A and slot B separately.

: Currently selected slot. (White card)

: Write-protect switch of SD card is set.

!INVALID

: SD card cannot be read or

written to, or restored.

!FORMAT

: SD card requires

formatting.

!RESTORE

: SD card requires

restoring.

!INCORRECT

When [Rec Mode] is set to other than

“AVCHD”/“SD”/“Web” with a Class 4 SD

card inserted.

When the SD card is not supported.

!REC INH

When attempting to record in 50p or 50i to

an SD card recorded in [AVCHD]60p or

60i (or vice versa).

When attempting to record a large clip

while a media that does not support large

clip recording is inserted.

(

P136 [ 4GB File Spanning(SDXC) ] )

When an SD card lower than Class 10 is

inserted while in the XHQ mode.

The following icons are displayed during FTP

upload.

(

P180 [Uploading a Recorded Video Clip] )

Icon

Status

FTP transfer is in progress.

Three images are alternately

displayed, and the arrows

become animated. In this case,

instead of the recordable time of

the SD card, an estimated value

of the remaining transfer time is

displayed.

(Yellow)

Error has occurred during FTP

transfer.

Memo :

This item is not displayed when [Main Menu]

[LCD/VF]

[Display Settings]

[Media

Remain] is set to “Off”. However, warnings will

be displayed.

(

P123 [ Media Remain ] )

Displayed on the Display 0 and Display 1

screens only in the case of warnings. (When the

remaining time is shorter than 3 minutes)

The icons appear on all display screens in the

following cases.

When recording is performed to only one of

the slots while [System]

[Record Set]

[Slot Mode] is set to “Dual”.

(

P136 [ Slot Mode ] )

When recording is performed to only one of

the slots while [System]

[Record Set]

[Record Format]

[System] is set to “HD

+SD” or “HD+Web”.

(

P132 [ System ] )

The displayed time is an estimate.

Frame rate

Frame rate/SDI IN

Displayed as xx/yy fps (xx: recording frame

rate, yy: playback frame rate) only when [Rec

Mode] is set to “Variable Frame”.

(

P135 [ Rec Mode ] )

“SDI IN

” is displayed when a device is

connected to the [SDI IN] terminal, and

[System]

[Record Set]

[Record

Format]

[System] is set to “HD(SDI In)” or

“SD(SDI In)”.

(

P132 [ System ] )

146

Display Screen in Camera Mode

Display/S

tus
S

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands