JVC GY-HM850CHE, Instructions Manual

Page: 123 / 220

Media Remain
For setting whether to display the remaining space
of the recording SD card.
[Setting Values:
R
On, Off]
Memo :
0 When the remaining space warning is
displayed, the information appears even when
“Off” is selected.
0
The displayed time is an estimate.
TC/UB
For specifying whether to display the time code or
and user’s bit on the LCD monitor or viewfinder
screen.
Whether time code or user’s bit is displayed is
dependent on the setting of the [TC DISPLAY ]
switch inside the LCD monitor of the camera
recorder.
[Setting Values:
R
On, Off]
Histogram
For setting whether to display the histogram, which
shows the distribution of different points with
different levels of brightness in an image.
[Setting Values: On,
R
Off]
Memo :
0
When the histogram is displayed, the audio level
meter display is turned off temporarily.
9 Top
For selecting the maximum brightness limit for
changing the histogram display color.
[Setting Values: 5% to 110% (in 5% increments)]
(
R
80%)
9 Bottom
For selecting the minimum brightness limit for
changing the histogram display color.
[Setting Values: 0% to 105% (in 5% increments)]
(
R
20%)
Audio Meter
For setting how the audio level meter is displayed
on the LCD monitor or viewfinder screen.
0
Auto:
4ch display when [System]
B
[Record Set]
B
[Record Format]
B
[
W
Audio] is set to “4ch”, and
2ch display ([CH-1]/[CH-2]) in all other cases.
During playback, whether 4ch display or 2ch
display ([CH-1]/[CH-2]) is used varies with the
recorded clip.
0
CH1/2:
Displays the audio level meter for [CH-1] and
[CH-2].
0
Off:
Audio level meter is not displayed.
[Setting Values:
R
Auto, CH1/2, Off]
Memo :
0
When [Histogram] is set to “On”, this item is fixed
at “Off” and selection is disabled.
Battery
For setting the display of the remaining battery
power in the display on the LCD monitor and
viewfinder screen.
The battery information appears only on the
Display 2 screen in Camera mode.
(
A
P145 [Display 2 screen] )
0
Time:
Displays the remaining battery power in
minutes. (min)
0
Capacity%:
Displays the remaining battery power in
percentage. (%)
0
Voltage:
Displays the current battery voltage in units of
0.1 V. (V)
0
[Off]:
The remaining battery power is not displayed.
[Setting Values:
R
Time, Capacity%, Voltage, Off]
LCD/VF Menu
123
Menu
Display and
D
etailed
S
etti
ngs