JVC GY-HM850CHE Instructions Manual Download

Page: 29 / 220

Attach the viewfinder cable to the

viewfinder terminal.

Pin the viewfinder cable to the clamp.

Memo :

To attach or detach the viewfinder, set the

[POWER ON/OFF] switch on this unit to “OFF”.

Opening/Closing the Lens Cover

Use the lens cover open/close switch to open or

close the lens cover.

Before shooting, open the lens cover.

When this camera recorder is not in use, close the

lens cover to protect the lens.

Caution :

Do not press against the lens cover with force.

Doing so may damage the lens or the cover.

Attaching/Detaching the Hood

Attaching the Hood

Align the markings on the camera recorder and

hood; turn the hood in the direction of the arrow until

it is locked.

Detaching the Hood

Remove the hood when attaching a filter,

teleconverter or wide converter to the front of the

lens.

While pressing the hood release button, turn the

hood in the anti-clockwise direction to remove it.

Settings and Adjustments Before Use

ati

ons

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands