JVC GY-HM850CHE Instructions Manual Download

Page: 208 / 220

Symptom

Action

Incorrect display on the

viewfinder.

Is the LCD monitor used with [LCD/VF]

[LCD + VF] set to “Off”?

(

P120 [ LCD + VF ] )

The actual recording time is

shorter than the estimated

time.

The recordable time may be shorter depending on the shooting

conditions or the subject.

The two camera recorders are

not synchronized even though

the time codes have been

synchronized. (

on the Slave

device is not displayed.)

Is the [TC GENE.] switch set to “FREE”?

(

P78 [Synchronizing the Time Code with an External Time Code

Generator] )

Set [System]

[Record Set]

[Record Format]

[

Frame & Bit

Rate] such that the two camera recorders have the same frame rate.

(

P133 [

Frame & Bit Rate ] )

Cannot connect to wireless

LAN.

Check the mode of connection and method of setting ([SSID] and

[Passphrase] in cases other than WPS).

(

P175 [Connecting via Wireless LAN] )

Even if the Passphrase is wrong, “Completed the Setup Wizard.

Please Input the Passphrase into Your Device.” may appear at the

browser setting depending on the type of encryption.

Adjust [Passphrase] again.

The View Remote screen turns

black.

The screen flickers.

The screen freezes.

Cannot perform remote

operation.

The network path is congested.

Wait a while before refreshing (reloading) the web browser.

The problem may be resolved by clearing the web browser cache.

The clips cannot be uploaded

to the FTP server.

Adjust the [Clip Server] settings.

(

P140 [ Clip Server ] )

The maximum size of the recorded clip is 64 GB.

If a file size limit is set in the FTP server settings, set the size limit to

more than 64 GB.

Take necessary action as described in “[List of FTP Transfer

Errors] P 203”.

The wireless LAN is

disconnected.

The wireless LAN may be disconnected depending on the

environment. Change the usage environment.

Connect via wired LAN.

(

P177 [Connecting via Wired LAN] )

GPS signal cannot be

received.

Signal reception from GPS satellites may be affected by buildings or

trees.

Perform positioning preferably at an unobstructed location with a clear

view.

Radio wave reception may be affected by weather conditions such as

on a cloudy or rainy day.

The position is not accurate.

The precision error may be up to hundreds of meters if the GPS signal

is weak or reflected off surrounding buildings.

208

Troubleshooting

Others

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands