Viewing Recorded Videos
Immediately (Clip Review)
You can check (review) the last recorded video clip
on the screen.
However, the video clip cannot be played back if
the settings of the camera recorder are different
from the video format (Resolution/Frame & Bit
Rate/SD Aspect) of the clip.
1
Assign the “Clip Review” function to any of
the user buttons.
* This excludes the [AUTO FOCUS/11] button.
P42 [Assignment of Functions to User
2
Press the button assigned with the “Clip
Review” function during standby (“STBY”
is displayed).
Playback of the configured section starts.
Memo :
0
The video clip is played back according to the
setting in [Main Menu]
B
[Camera Function]
B
[User Switch Set]
B
[Clip Review]. By default
setting (Last 5sec), the last 5 seconds of the clip
is played back.
0
When playback is complete, the camera
recorder exits Clip Review and returns to
“STBY” (recording standby) mode.
Caution :
0
During Clip Review, only the [CANCEL] and
[REC] buttons are enabled.
Press the [CANCEL] button to cancel clip review
and return to “STBY” (recording standby) mode.
Press the [REC] button to cancel clip review and
enter recording mode. It will take some time to
start recording after the button is pressed.
0
When the last clip is less than 5 seconds, the
whole clip is played back.
0
Only video clips in the currently selected slot can
be reviewed.
0
When there are no clips in the selected slot, Clip
Review function is disabled.
0
Clip Review is unavailable when Clip
Continuous Rec is paused (“STBY
C
”, yellow
text). To operate Clip Review, use the
[CANCEL] button to set to “STBY
C
” (white text)
first.
0
Clip Review is unavailable when the camera
recorder is connected to an external equipment
and the equipment is in recording state.
0
Clip Review is unavailable when operating View
Remote via network connection.
Viewing Recorded Videos Immediately (Clip Review)
83
Sh
ooting
Summary of Contents for GY-HM850CHE
Page 2: ...2 ...
Page 219: ...219 ...
