JVC GY-HM850CHE Instructions Manual Download

Page: 142 / 220

Adding/Editing

Frequently Used Menu

Items

You can select and add/edit frequently used menu

items freely to create a personal menu screen

(Favorites Menu).
Memo :

[Favorites Menu] is only enabled in the Camera

mode. [Favorites Menu] remains unchanged

even when the recording format changes.

When [Main Menu]

[System]

[Record Set]

[Record Format]

[System] is set to “HD(SDI

In)” or “SD(SDI In)”, [Favorites Menu] is

disabled.

Up to 20 menu items can be added.

Added items in [Favorites Menu] will not be reset

even when [Main Menu]

[Reset All] is

executed.

Long descriptive names may be displayed for

the menu items in [Favorites Menu] to enable

better understanding.

Registration to Favorites Menu

Press the [MENU] button to open the [Main

Menu] screen.

Select the menu or submenu item to add.

Normal

Type

Shooting Assist

Memo :

Adding items to [Favorites Menu] cannot be

performed in the following cases. [USER1 Add]

is displayed in gray in the operation guide.

Selected item is already added to [Favorites

Menu].

Number of menu items that can be added (20

items) is exceeded.

Press the [OIS/1] button.

A screen to confirm the addition appears.

Select [Add] and press the Set button (

The selected menu item is added to [Favorites

Menu].

Type

Cancel

Add

Focus Assist

Add to Favorites Menu?

142

Adding/Editing Frequently Used Menu Items

Menu

Display and

etailed

etti
ngs

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands