JVC GY-HM850CHE Instructions Manual Download

Page: 39 / 220

Adjusting the LCD Monitor

Tilt 90 degrees downward

Tilt 180 degrees upward

Slide the LCD cover lock release knob to

open the LCD monitor.

Incline the LCD monitor to a position that

enables easy viewing.

Rotate the LCD monitor to adjust the angle.

While the LCD monitor is open, you can

rotate it 180 degrees upward or 90 degrees

downward.

Rotating the LCD monitor 180 degrees

upward enables you to see the screen from

the lens side. To display the image when it is

viewed from the opposite direction (mirror

image), perform setting as follows.

Set [Main Menu]

[LCD/VF]

[LCD

Mirror] to “Mirror”

Set button (

)

(

P120 [ LCD Mirror ] )

Adjust the brightness, contour, and

contrast of the LCD monitor.

You can change the angle and brightness of the

LCD monitor according to your usage condition.

Changing the brightness of the screen will not

affect the recorded images.

Adjusting the Brightness

Use the [LCD /

－

] button to adjust the

brightness of the LCD monitor.

The [+] button brightens the monitor and the

[

－

] button darkens it.

Press the [+] and [

－

] buttons simultaneously

to return to standard settings.

During adjustment, the brightness level is

displayed on the LCD monitor.

13000K

1/ 100

F1. 6

ND 1 /64

Adjusting the Contour

Use the [LCD P/-] button to adjust the

contour of the LCD monitor.

The [+] button increases contour correction

and the [

－

] button decreases contour

correction.

Press the [+] and [

－

] buttons simultaneously

to return to standard settings.

During adjustment, the contour level is

displayed on the LCD monitor.

13000K

1/ 100

F1. 6

ND 1 /64

Memo :

During Focus Assist operation, the contour

correction effect on the LCD monitor will be

temporarily disabled.

Adjusting the Contrast

Use the [LCD Contrast] menu to adjust the

contrast of the LCD monitor.

Adjust using [Main Menu]

[LCD/VF]

[LCD

Contrast].

Increasing the value increases the contrast.

[Setting Values: +10 to -10] (Default value: 0)

Adjusting the LCD Backlight

Adjust using [Main Menu]

[LCD/VF]

[LCD Backlight].

(

P120 [ LCD Backlight ] )

When using the camera recorder at a bright

location such as one subject to outside light,

setting to “Bright” helps to ease viewing.

You can also adjust the backlight using the

user button assigned with the “LCD

Backlight” function.

(

P42 [Assignment of Functions to User

Buttons] )

Adjusting the LCD Monitor and Viewfinder

ati

ons

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands