JVC GY-HM850CHE Instructions Manual Download

Page: 117 / 220

Shooting Mode

For switching the settings for image recording on

the camera.

Standard:

Normal shooting mode.

This setting is suitable for shooting low-noise

image quality.

Use this mode in well lit places.

Extended:

High sensitivity shooting mode.

This setting enables recording in various

brightness conditions.

Use this mode in places where the lighting is

difficult to control and the brightness is

insufficient.

[Setting Values:

Standard, Extended]

Reset Process

Restores all items in the [Camera Process] menu

to their default settings.

Detail/Adjust Item

V/H Balance

For setting the H/V balance to enhance contour

(detail) in the horizontal (H) or vertical (V) direction.

H+1 to H+4:

Increasing the value enhances contour in the

horizontal direction.

V+1 to V+4:

Increasing the value enhances contour in the

vertical direction.

[Setting Values: H+1 to H+4,

Normal, V+1 to V+4]

Memo :

When [System] under [Record Format] is set to

“SD”, this item is fixed at “Normal”.

When [System] under [Record Format] is set to

“HD+SD”, this item can be set during HD

recording, but will be fixed at “Normal” during SD

recording.

H Frequency

For specifying the correction frequency of the

horizontal contour. Set this according to the object.

High:

Emphasizes the high frequency range. Use this

when shooting objects with fine patterns.

Middle:

Emphasizes the intermediate frequency range.

Low:

Emphasizes the low frequency range. Use this

when shooting objects with large patterns.

[Setting Values: High,

Middle, Low]

Memo :

When [System] under [Record Format] is set to

“SD”, this item is fixed at “Low”.

When [System] under [Record Format] is set to

“HD+SD”, this item can be set during HD

recording, but will be fixed at “Low” during SD

recording.

Skin Detail

For turning On/Off the Skin Detail function, which

is used to adjust the contour correction effect of the

colors captured.

Select “On” to soften the detail at areas where skin

tone is detected.

[Setting Values: On,

Off]

Level

For setting the level of contour correction (degree

of softening) using the Skin Detail function.

Decreasing the value increases the level of contour

correction (degree of softening).

[Setting Values: -1,

-2, -3]

Range

For adjusting the range of skin tone to trigger the

Skin Detail function.

Increasing the value increases the range.

[Setting Values: -5 to +5 (

0)]

Camera Process Menu

117

Menu

Display and

etailed

etti
ngs

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands