JVC GY-HM850CHE Instructions Manual Download

Page: 81 / 220

When [Max & Min]/[Max]/[Min] is selected

The cursors appear according to the setting

when the button is pressed.

Green and yellow frames appear, and the

brightness levels of these areas are displayed.

P 13000K

1/100

F1.6

0dB

AE+6

ND 1/64

12:34:56

Jan 24,2014

00:00:00.00

5.6 f t

100min

50min

282min

Cursor

Brightness
Indication

(Yellow)

(Green)

Hold down the button in the state in

, the

positions of the brightest (Max) and darkest

(Min) areas in the screen are automatically

detected with regard to the changes of the

object, and the brightness level of these areas

are displayed.

P 13000K

1/100

F1.6

0dB

AE+6

ND 1/64

12:34:56

Jan 24,2014

00:00:00.00

5.6 f t

100min

50min

282min

(Min: Yellow)

Cursor

(Max: Green)

Cursor

Brightness
Indication

Pressing the button in the state in

stops the

automatic position detection. The frames are

fixed at the stopped positions and the

brightness levels are displayed.

By pressing the button, the cursors and

brightness indication disappear.

P 13000K

1/100

F1.6

0dB

AE+6

ND 1/64

12:34:56

Jan 24,2014

00:00:00.00

5.6 f t

100min

50min

282min

When [Manual] is selected

The brightness of the cursor position is

displayed when the button is pressed.

P 13000K

1/100

F1.6

0dB

AE+6

ND 1/64

12:34:56

Jan 24,2014

00:00:00.00

5.6 f t

100min

50min

282min

Cursor
(Green)

Brightness
Indication

By pressing the button, the cursors and

brightness indication disappear.

P 13000K

1/100

F1.6

0dB

AE+6

ND 1/64

12:34:56

Jan 24,2014

00:00:00.00

5.6 f t

100min

50min

282min

Hold down the button in the state in

, the

cursor blinks in green.

Move the cursor with the cross-shaped button

(

JKHI

) to specify the position to display the

brightness.

When you decide on the position, press the Set

button (

) to confirm.

P 13000K

1/100

F1.6

0dB

AE+6

ND 1/64

12:34:56

Jan 24,2014

00:00:00.00

5.6 f t

100min

50min

282min

(Blinks in
green)

Cursor

Brightness
Indication

Frames are fixed at the stopped positions and

the brightness is displayed.

Memo :

When moving the cursor position, [Shutter]/[AE

Level] control is disabled.

When the brightness is 0 % in the entire screen,

the frame is fixed in the center.

If the cursor is outside the “4:3” range, changing

[Main Menu]

[System]

[Record Set]

[Record Format]

[SD Aspect] from “16:9” to

“4:3” restores the cursor to the default position.

(

P135 [ SD Aspect ] )

Setting Spot Meter

ooting

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands