Juniper SRX550, Hardware Manual

Page: 73 / 220

RELATED DOCUMENTATION
RJ-45 Connector Pinouts for the SRX550 Services Gateway Ethernet Port | 57
RJ-45 Connector Pinouts for the SRX550 Services Gateway Console Port | 58
RJ-45 Connector Pinouts for the SRX550 Services Gateway Ethernet Port
The port on the front panel labeled ETHERNET is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle
that accepts an Ethernet cable for connecting the services gateway to a management LAN (or other device
that supports out-of-band management). Table 20 on page 57 describes the RJ-45 connector pinouts for
the Ethernet port.
Table 20: RJ-45 Connector Pinouts for Services Gateway Ethernet Port
Signal Pin
TX+ 1
TX- 2
RX+ 3
Termination network 4
Termination network 5
RX- 6
Termination network 7
Termination network 8
RELATED DOCUMENTATION
RJ-45 Connector Pinouts for the SRX550 Services Gateway Console Port | 58
Interface Cabling and Wiring Specifications for the SRX550 Services Gateway | 56
57