Juniper SRX550 Page 108 Hardware Manual Download

Page: 108 / 220

Figure 24: Connecting DC Power Cables

g034111

6. (Optional) If you have two DC power sources and wish to deploy A/B feed redundancy for the services

gateway, connect the DC power cables to B+ and B- terminals also.

7. Replace the clear plastic cover over the terminal studs on the faceplate.

8. Verify that the power cables are connected correctly, that they are not touching or blocking access to

services gateway components, and that they do not drape where people could trip on them.

NOTE:

The services gateway must be connected to earth ground during normal operation. The

protective earthing terminal on the back panel of the chassis is provided to connect the services

gateway to ground.

Summary of Contents for SRX550





























































































































































































































Search results

Summary of Contents for SRX550

Reviews:

Related manuals for SRX550

Brands by name

Popular brands

Juniper SRX550, Hardware Manual

Search results

Summary of Contents for SRX550

Reviews:

Related manuals for SRX550

Brands by name

Popular brands