Juniper SRX550, Hardware Manual

Page: 39 / 220

Table 8: SRX550 Services Gateway Back Panel Components (continued)
Usage Description Location Component Number
NOTE: This slot is not used. Top center of
the back panel
ACE Slot 2
Connects the services
gateway chassis to earth
ground.
Contains two M4 screws that
you use to connect the
grounding cable to the
services gateway chassis.
Left side of the
back panel
Grounding point 3
Supplements the data
storage capacity of the
services gateway.
Slot where you can install an
extra data storage device.
Center of the
back panel,
lower edge
Storage slot 4
While working on the
services gateway, use the
ESD outlet to plug in an
ESD grounding strap to
prevent any damage to the
services gateway.
Connector for an ESD wrist
band.
Right side of
the back panel
Electrostatic
discharge (ESD)
outlet
5
The optional air filter helps
keep the services gateway
and its components free
from dust particles. The air
filter is hot-swappable.
NOTE: The air filter is
required for NEBS
compliance.
Provides access to the
optional air filter.
NOTE: The air filter is not
currently orderable.
Right of the
back panel
Air filter cover 6
RELATED DOCUMENTATION
SRX550 Services Gateway Chassis | 14
SRX550 Services Gateway Front Panel | 15
SRX550 Services Gateway Power Supply | 28
23