Juniper SRX550, Hardware Manual

Page: 74 / 220

RJ-45 Connector Pinouts for the SRX550 Services Gateway Console Port
The port on the front panel labeled CONSOLE is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle
that accepts an RJ-45 cable for connecting the services gateway to a management LAN (or other device
that supports out-of-band management). Table 21 on page 58 describes the RJ-45 connector pinouts for
the console port.
Table 21: RJ-45 Connector Pinouts for the Services Gateway Console Port
Description Signal Pin
Request to Send RTS 1
Data Terminal Ready DTR 2
Transmit Data TXD 3
Signal Ground Ground 4
Signal Ground Ground 5
Receive Data RXD 6
Data Set Ready DSR/DCD 7
Clear to Send CTS 8
RELATED DOCUMENTATION
RJ-45 Connector Pinouts for the SRX550 Services Gateway Ethernet Port | 57
Interface Cabling and Wiring Specifications for the SRX550 Services Gateway | 56
58