Juniper SRX550, Hardware Manual

Page: 100 / 220

4. Configure the port settings shown in Table 26 on page 84 .
Table 26: Port Settings
Value Port Settings
9600 Bits per second
8 Data bits
None Parity
1 Stop bits
None Flow control
5. In the HyperTerminal window, type AT.
For more information on the AT commands, see the Initial Configuration for Security Devices .
An OK response indicates that the modem can communicate successfully with the COM port on the
management device.
6. To dial the modem that is connected to the console port on the services gateway, type ATDT
remote-modem-number. For example, if the phone number of the modem connected to the console
port on the services gateway is 0019785551234, type ATDT 0019785551234.
The services gateway login prompt appears.
7. Log in as the user root. No password is required at initial connection, but you must assign a root
password before you commit any configuration settings.
RELATED DOCUMENTATION
Connecting to the SRX550 Services Gateway from the CLI Remotely | 104
Configuring the Modem at the SRX550 Services Gateway End | 85
Connecting the Modem to the Console Port on the SRX550 Services Gateway | 80
84