Juniper SRX550, Hardware Manual

Page: 133 / 220

the interface ge-0/0/0. All interfaces are configured as Layer 3 interfaces. See Table 33 on page 117 for
the default interface configuration.
Table 33: Default Interface Configuration for the Services Gateway
Address
DHCP
State
Security
Zone Connector Interface Port Label
Dynamically assigned Client Untrust RJ-45 ge-0/0/0
NOTE: If chassis
clustering is
enabled, use this
port as the
management
port (fxp0).
0/0
Ports 0/1 through 0/5 are
grouped into a VLAN with
IP address 192.168.1.1/24.
Server Trust RJ-45 ge-0/0/1 (if
used)
NOTE: If chassis
clustering is
enabled, use this
port as the
control port
(fxp1).
0/1
Server Trust RJ-45 ge-0/0/2 (if
used)
NOTE: Use this
port as a fabric
port.
0/2
Server Trust RJ-45 ge-0/0/3 (if
used)
NOTE: Use this
port as a fabric
port.
0/3
117