Juniper SRX550, Hardware Manual

Page: 37 / 220

Table 7: SRX550 Services Gateway Front Panel LEDs (continued)
Description
LED
Color LED State
LED
Label
All configured high availability links are available. Green Steadily on HA
High availability links are not working as expected and a cluster member
might be missing or unreachable.
Red
Some configured high availability links are down, but enough links are
still active for full high availability functionality. In this situation,
performance might be reduced, current bandwidth could cause packet
drops, or a single point of failure might now exist.
Amber
High availability is not enabled. Unlit Off
The Mini-PIM in the corresponding slot is functioning normally. Green On Steadily MPIM-1,
MPIM-2
The Mini-PIM hardware in the corresponding slot has failed or its
anti-counterfeit check failed.
Red
There is no Mini-PIM in the corresponding slot, or that the Mini-PIM is
not detected by the device.
Unlit Off
The redundant power supply is operating normally Green On Steadily RPS
One of the following conditions has occurred:
•
The primary power supply has failed, and the device is being powered
by the redundant power supply.
•
The redundant power supply has been installed, but is not connected
to a power source.
Red
The redundant power supply is not installed. Unlit Off
NOTE: The ACE LED is not functional. ACE
The services gateway is transferring data to or from the optional storage
device.
Green Blinking STORAGE
The optional storage device is installed but no data is being transferred
to or from it.
Green On Steadily
The optional storage device is not installed. Unlit Off
21