Juniper SRX550, Hardware Manual

Page: 128 / 220

Table 32: Configuring Basic Settings (continued)
Using the CLI Using the J-Web Setup Wizard
Required or
Optional Task
Specify the domain name.
For example:
set domain-name
lab.device.net
From the Configure System:
Identification page, type the domain
name of the services gateway; for
example, lab.device.net.
Required Identify the domain
name of the network or
network to which the
services gateway
belongs.
Specify the root password.
For example:
set root-authentication
ssh-rsa “ssh-rsa
AAAAB3Nza...D9Y2gXF9ac==
root@devicea.lab.device.net”
1. On the Configure System:
Identification page, type the
root password, for example
ssh-rsa
AAAAB3Nza...D9Y2gXF9ac==
root@devicea.lab.device.net
2. Retype the password in the
Verify root password field.
Required Define the root
password for the user
with unrestricted access
to the services gateway.
NOTE: For readability,
the entire key is not
shown.
Set the default gateway IP
address and the next-hop
router address. For example:
set interfaces ge-0/0/1 unit
0 family inet address
10.0.0.1/24
set routing-options static
route 0.0.0.0/0 next-hop
10.0.0.2
NOTE: The example
assumes that the next-hop
router address is 10.0.0.2.
From the Configure System:
Network Settings page, type the IP
address of the default gateway; for
example, 10.0.0.1/24.
Optional Define the IP address of
the default gateway.
The default gateway is
the IP address and
subnet of the next-hop
router, which is
generally provided by
the ISP for a branch
office.
Specify the address of the
DNS server. For example:
set name-server
10.148.2.32
From the Configure System:
Network Settings page, type the IP
address of the DNS server; for
example, 10.148.2.32. Then click
Add.
Optional Add the names of
servers that maintain
databases for resolving
hostnames and IP
addresses.
112