Juniper SRX550, Hardware Manual

Page: 34 / 220

Table 6: SRX550 Services Gateway Front Panel Components (continued)
Description Location Component Number
The Gigabit Ethernet ports have the following
characteristics:
•
Use an RJ-45 connector.
•
Operate in full-duplex and half-duplex modes.
•
Support flow control.
•
Support autonegotiation.
The Gigabit Ethernet ports can:
•
Function as front-end network ports.
•
Provide LAN and WAN connectivity to hubs, switches,
local servers, and workstations.
•
Forward incoming data packets to the services
gateway.
•
Receive outgoing data packets from the services
gateway.
NOTE: LAN bypass is not supported on the services
gateway.
Left side of the
front chassis
panel, lower edge
6 fixed Gigabit
Ethernet ports:
•
Port labeled 0/0
•
Port labeled 0/1
•
Port labeled 0/2
•
Port labeled 0/3
•
Port labeled 0/4
•
Port labeled 0/5
Provides link speeds
of 10/100/1000
Mbps.
12
The SFP Ethernet ports have the following
characteristics:
•
Operate in full-duplex and half-duplex modes.
•
Support flow control.
•
Support autonegotiation.
The SFP Ethernet ports can:
•
Function as front-end network ports.
•
Provide LAN and WAN connectivity to hubs, switches,
local servers, and workstations.
•
Forward incoming data packets to the services
gateway.
•
Receive outgoing data packets from the services
gateway.
Middle of the
front chassis
panel, lower edge
4 SFP Ethernet ports:
•
Port labeled 0/6
•
Port labeled 0/7
•
Port labeled 0/8
•
Port labeled 0/9
Provides link speeds
of 10/100/1000
Mbps.
13
18