Juniper SRX550 Hardware Manual Download Page 104

Page: 104 / 220

4. Insert the power cord plug into an external AC power source receptacle.

NOTE:

Each power supply must be connected to a dedicated AC power feed and a dedicated

external circuit breaker. We recommend that you use a 15 A (250 VAC) minimum, or as

permitted by local code.

Figure 22: Connecting an AC Power Cord

5. Dress the power cord appropriately. Verify that the power cord does not block the air exhaust and

access to services gateway components or drape where people could trip on it.

NOTE:

The services gateway must be connected to earth ground during normal operation. The

protective earthing terminal on the side of the chassis is provided to connect the services gateway

to ground.

CAUTION:

We recommend using a surge protector for the power connection.

Summary of Contents for SRX550





























































































































































































































Search results

Summary of Contents for SRX550

Reviews:

Brands by name

Popular brands

Juniper SRX550, Hardware Manual

Search results

Summary of Contents for SRX550

Reviews:

Brands by name

Popular brands