Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 333 / 340

Table 94: Device Status Information (continued)
Description Column
Connection status of the device in NSM:
• Up—Device is currently connected to NSM.
•
Down—Device is not currently connected to NSM but has connected in
the past.
• Never Connected—Device has never connected to NSM.
The Device Server checks the connection status of each device every 120
seconds by default. You can change this behavior by editing the value for
the
devDaemon.deviceHeartbeatTimeout parameter in the Device Server
configuration file. Refer to the Network and Security Manager Installation
Guide for more information on editing configuration files.
NOTE: If the network connection goes down for a period longer than six to
eight minutes, the device connection will permanently time out. If this occurs
and the device goes down for any reason, the device still appears as Up in
the Device Monitor.
Connection
Status
Displays the current alarm status for each device in NSM:
• If device has any alarms, the most severe alarm severity is displayed (either
Major or Minor).
• None—The device has no alarms.
• Unknown—The device status is unknown. For example, the device might
not be connected.
• N/A—The device's alarm is not pollable or discoverable, for example, this
column shows "N/A" for ScreenOS and IDP devices.
• Alarm is colored:
• Red for Major.
• Orange for Minor.
• Green for Ignore, None, Unknown, or N/A.
Alarm
Displays the inventory status for hardware on the device:
• In Sync—The inventory information in the NSM database is synchronized
with the information on the device.
•
Out Of Sync—The inventory information in the NSM database is not
synchronized with the information on the device.
• N/A—The connected device is a ScreenOS or IDP device, or the device is
not connected and imported.
H/W Inventory
Status
Displays the inventory status for software on the device:
• In Sync—The inventory information in the NSM database is synchronized
with the software on the device.
• Out Of Sync—The inventory information in the NSM database is not
synchronized with the software on the device.
• N/A—The connected device is a ScreenOS or IDP device, or the device is
not connected and imported.
S/W Inventory
Status
315 Copyright © 2010, Juniper Networks, Inc.
Chapter 24: Viewing Logs in Secure Access Devices