Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 151 / 340

Table 30: Configuring WSAM Resource Profile Details (continued)
Your Action Function Option
Select the role, and click Add . Allows you to specify the roles
to which the resource profile
applies. Role Selections
To configure WSAM destination network resource profile:
1.
In the NSM navigation tree, select Device Manager > Devices . Click the Device Tree
tab, and then double-click the Secure Access device for which you want to configure
a WSAM destination network resource profile.
2.
Click the Configuration tab, and select Users > Resource Profiles > SAM > WSAM
Destinations . The corresponding workspace appears.
3.
Click the New button and the New dialog box appears.
4.
Add or modify settings as specified in Table 31 on page 133.
5.
Click one:
• OK — Saves the changes.
•
Cancel — Cancels the modifications.
Table 31: Configuring WSAM Destination Resource Profile Details
Your Action Function Option
Settings tab
Enter the name. Specifies a name for the resource
profile. Name
Enter the description. Describes the resource profile. Description
Enter a hostname or IP/netmask
pairs. You may include a port. Specifies which servers you want to
secure using WSAM. Allowed WSAM
Servers > Network
Destination
Select the Create an access
control policy check box to
enable this option.
Allows access to the server specified
in the Network Destination box
(enabled by default). Create an access
control policy
Settings > Roles tab
Select the role, and then click
Add .
Specifies the roles to which the
resource profile applies. Role Selections
Related
Documentation
Configuring a File Rewriting Resource Policy (NSM Procedure) on page 137
•
•
Configuring a JSAM Resource Profile (NSM Procedure) on page 93
133 Copyright © 2010, Juniper Networks, Inc.
Chapter 9: Configuring Secure Access Resource Profiles