Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 148 / 340

Table 29: Configuring Telnet/SSH Resource Profile details (continued)
Your Action Function Option
Enter the name or IP address. Specifies the name or IP address of the server to
which this resource profile should connect. Host
Enter the port or scroll to one. Specifies the port on which the Secure Access
device should connect to the server. Port
Enter the static username. For example enter
<username> or another Secure Access
device-appropriate session variable. Specifies the static username to pass the user’s
credentials to the server. Username
Select the Create an access control policy check
box to enable this feature.
Allows you to enable access to the specified server. Create access
control policy
Role Selections tab
Select the role and, then click Add . Allows you to specify the roles to which the
resource profile applies. Role Selections
Bookmarks tab > General tab
Enter the name. Specifies the name of the bookmark. Name
Enter the description. Describes the bookmark. Description
Enter a size from 8 to 36 pixels or scroll to the
required number. (By default, the Secure Access
device sets the font size to 12.) Specifies the size of the bookmark. Font Size
Select a size from the drop-down list. Specifies the size of the server display window. Screen Size
Enter the value in the Screen Buffer box (By
default, the Secure Access device sets the buffer
at 100 rows.) Allows the server window to change the number
of rows to display during scrolling. Screen Buffer
Select one of the following option:
• All Available roles —Displays the bookmark to
all of the roles associated with the resource
profile.
• Selected Roles —Displays the bookmark to a
subset of the roles associated with the resource
profile.
Specifies the roles to which you want to display the
bookmark. Roles
Bookmarks tab > Role Selections
Select the role, and then click Add . Allows you to specify the roles for which to display
a bookmark.
NOTE: The Role Selections tab is enabled only
when you select
Selected Roles option from the
Applies to roles drop-down list.
Role Selections
Copyright © 2010, Juniper Networks, Inc. 130
Configuring Secure Access Devices Guide