Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 245 / 340

•
Cancel —Cancels the modifications.
Table 62: Configuring SAML SSO Artifact Profile Resource Policy Details
Your Action Function Opton
SAML SSO > General tab or Detailed Role tab
Enter the name. Specifies the name of the
policy. Name
Enter the description. Describes the policy. Description
Enter the path Specifies the resources to
which this policy applies. New Resources
Select one of the following
options from the drop-down
list:
• Policy applies to ALL
roles
—Applies the policy to
all users.
•
Policy applies to SELECTED
roles
—Applies the policy
only to users who are
mapped to roles in the Role
Selection section.
• Policy applies to all roles
OTHER THAN those
selected below
—Applies the
policy to all users except for
those who mapped to the
roles in the Role Selection
section.
Specifies the roles to which
this policy applies. Role application
Select one of the following
options from the drop-down
list:
• Use SAML SSO —Secure
Access device performs a
single-sign on (SSO)
request to the specified URL
using the data specified in
the SAML SSO details
section.
• Do not use SAML
SSO
—Secure Access device
does not perform an SSO
request.
• Use Detailed
Rules
—Specifies one or
more detailed rules for this
policy.
Specifies that the Secure
Access device performs a
single-sign on (SSO) request
to the specified URL. Action
227 Copyright © 2010, Juniper Networks, Inc.
Chapter 14: Configuring Single Sign-On