Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 167 / 340

Configuring a Terminal Service Resource Policy (NSM Procedure)
When you enable the terminal services feature for a role, you need to create resource
policies that specify which remote servers a user can access.
To configure a terminal services resource policy:
1.
In the navigation tree, select Device Manager > Devices . Click the Device Tree tab,
and then double-click the Secure Access device for which you want to configure a
terminal services resource policy.
2.
Click the Configuration tab. Select Users > Resource Policies > Terminal Services .
3.
Add or modify settings as specified in Table 36 on page 149.
4.
Click one:
•
OK —Saves the changes.
• Cancel —Cancels the modifications.
Table 36: Configuring Terminal Service Resource Policy Details
Your Action Function Option
Access Control > General tab
Enter the name. Specifies the name for the policy. Name
Enter the description. Describes the policy. Description
Enter the server path. Specifies the servers to which this
policy applies. Resources
Select one of the following options from
the drop-down list:
•
All —Applies the policy to all users.
• Selected —Applies the policy only to
users who are mapped to roles in the
Role Selection section.
•
Except those selected —Applies this
policy to all users except for those who
map to the roles in the Role Selection
section.
Applies the policy to all the roles,
and to the roles that are mapped
and not mapped in the Role
Selection section. Applies to
roles
Select one of the following options from
the drop-down list.
• Allow —Allows access to the servers
specified in the Resources list.
• Deny —Denies access to the servers
specified in the Resources list.
• Detailed Rules —Allows you to specify
one or more detailed rules for this policy.
Allows or denies access to the
servers specified in the Resources
list. Action
149 Copyright © 2010, Juniper Networks, Inc.
Chapter 10: Configuring Secure Access Resource Policies