Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 165 / 340

Table 35: Configuring Telnet and Secure Shell Resource Policy Details
Your Action Function Option
Access Control > General tab
Enter the name. Specifies the name for the policy. Name
Enter the description. Describes the policy. Description
Enter the server path. Specifies the servers to which this
policy applies. Resources
Select one of the following options from
the drop-down list:
• All —Applies the policy to all users.
• Selected —Applies the policy only to
users who are mapped to roles in the
Role Selection section.
• Except those selected —Applies the
policy to all users except for those who
mapped to the roles in the Role
Selection section.
Specifies the roles to which this
policy applies. Applies to
roles
Select one of the following options from
the drop-down list.
• Allow —Allows access to the servers
specified in the Resources list.
• Deny —Denies access to the servers
specified in the Resources list.
• Detailed Rules —Allows you to specify
one or more detailed rules for this policy.
Allows or denies access to the
servers specified in the Resources
list. Action
Role Selections tab
Select a role and click Add to add roles
from Non-members to Members list.
Maps roles to the resource policy.
NOTE: This Roles Selection tab is
enabled only when you select
Selected or the Except the selected
option from the Applies to the role
drop-down list.
Role
Selections
Detailed Rules tab
Enter a name. Specifies the detailed rule name.
NOTE: This tab is enabled only when
you select
Detailed Rules from the
Action drop-down list.
Name
147 Copyright © 2010, Juniper Networks, Inc.
Chapter 10: Configuring Secure Access Resource Policies