Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 285 / 340

Table 77: Configuring IDP Sensor Details (continued)
Your Action Function Option
Select a role from the drop-down list. Allows you to change the user role
applied to this user’s profile with
this role.
NOTE: This option is enabled only
when you select
Replace user role
from the Action to be taken
drop–down list.
Replace user
role with this
role
Select one of the following options from
the drop-down list:
•
Permanent —User remains in the
quarantined state across subsequent
logins until the administrator releases
the user from the quarantined state.
• For this session only —Default. User
can log in to another session.
Allows you to make this role
assignment.
NOTE: This option is enabled only
when you select
Replace user role
from the Action to be taken
drop–down list.
Replace user
role..
Select one of the following options from
the drop-down list:
•
All —Applies this policy to all users.
• Selected —Applies this policy only to
users who are mapped to roles in the
Selected roles list. Make sure to add
roles to this list from the Available
roles list.
•
Except those selected —Applies this
policy to all users except for those who
are mapped to the roles in the
members list. Make sure to add roles
to this list from the Available roles list.
Allows you to apply this policy to
all roles or only to the users
mapped or only to the users who
are not mapped to roles. Applies to Roles
Select a role and click Add . Allows you to select and map roles
to user. Role Selection
Sensor Events tab
Enter the name. Specify a name for the event. Name
Enter the expressions or select one or
more clauses from the expressions
dictionary and click
insert expression .
For example, to check for all
critical/highest severity level attacks,
enter the following expression:
idp.severity >= 4
Specifies the expressions. Expressions
Related
Documentation
Configuring General Network Settings (NSM Procedure) on page 271
•
•
Configuring Global Security (NSM Procedure) on page 261
267 Copyright © 2010, Juniper Networks, Inc.
Chapter 17: Configuring Secure Access System Management Features