Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 292 / 340

Table 79: Configuring Internal Port Details (continued)
Your Action Function Option
Enter the unit in bytes.
NOTE: Use the default
MTU setting (1500)
unless you must change
the setting for
troubleshooting purposes.
Specifies a maximum transmission unit for the
Secure Access device’s internal interface. MTU (bytes)
Enter the name/IP
address for the
destination network. Allows you to specify the destination network/IP
address. Routes >
Destination
Network/IP
Enter the netmask of the
static route. Specifies the netmask of the static route that the
Secure Access device should use when routing
requests. Routes >
Netmask
Enter the IP address of
the gateway of the static
route. Specifies the gateway of the static route that the
Secure Access device should use when routing
requests. Routes >
Gateway
Enter the IP address of
the interface of the static
route. Specifies the interface of the static route that the
Secure Access device should use when routing
requests. Routes >
Interface
Enter the metric. Specifies metric for comparing multiple routes to
establish precedence.
NOTE: Generally, the lower the number, from 1 to
15, the higher the precedence. So, a route with a
metric of 2 would be chosen over a route with a
metric of 14. The metric value of zero (0) identifies
the route as one that should not be used.
Routes > Metric
Virtual Ports tab
Enter the name. Specifies a unique name for the virtual port. Name
Enter the IP address. Specifies a unique IP alias to associate with the
virtual port.
NOTE: Do not use an IP address that is already
associated with another virtual port.
IP Address
ARP Cache tab
Enter the IP address. Specifies the IP address of a network device such
as a router or backend application server that
connects to the Secure Access device to determine
the physical (MAC) address. IP Address
Enter the physical
address. Specifies the physical address of a network device
such as a router or backend application server that
connects to the Secure Access device to determine
the physical (MAC) address Physical
Address
Copyright © 2010, Juniper Networks, Inc. 274
Configuring Secure Access Devices Guide