Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 168 / 340

Table 36: Configuring Terminal Service Resource Policy
Details
(continued)
Your Action Function Option
Role Selections tab
Select a role and click Add to add roles from
Non-members to Members list.
Maps roles to the resource policy.
NOTE: The Role Selection tab is
enabled only when you select the
Selected or Except the selected
option from the Applies to role
drop-down list.
Role
Selections
Detailed Rules tab
Enter a name. Specifies the detailed rule name.
NOTE: This Detailed Rules tab is
enabled only when you select
Detailed Rules option from the
Action drop-down list.
Name
Select one of the following options from
the drop-down list:
• Allow —Allows the user to access the
resource.
• Deny —Denies the user to access the
resource.
Specifies the action you want to
perform if the user request matches
a resource in the Resource list
(optional). Action
Specify one of the following options:
• The same or a partial list of the resources
specified on the General tab.
•
A specific path or file on the server(s)
specified on the General tab, using
wildcards when appropriate.
• A file type, preceded by a path if
appropriate or just specify
*/*.file_extension to indicate files with
the specified extension within any path
on the server(s) specified on the General
tab.
Specifies the resource to which
detailed rule applies. New
Resources
Specify one of the following options:
• Boolean expressions: Using system
variables, write one or more Boolean
expressions using the NOT, OR, or AND
operators.
• Custom expressions: Using the custom
expression syntax, write one or more
custom expressions.
Specifies one or more expressions
to evaluate to perform the action. Conditions
Options
Copyright © 2010, Juniper Networks, Inc. 150
Configuring Secure Access Devices Guide