Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 112 / 340

4.
Add or modify settings as specified in Table 21 on page 94.
5.
Click one:
• OK —Saves the changes.
•
Cancel —Cancels the modifications.
Table 21: Configuring JSAM Rosource Profile details
Your Action Function Option
Settings tab
Enter the name. Specifies a name for the resource
profile. Name
Enter the description. Describes the resource profile. Description
Select JSAM option to configure
JSAM resource profile.
Allows you to select either JSAM or
WSAM to configure resource profile. Type
Settings tab > JSAM > Custom
Enter the hostname or IP
address. Specifies the hostname or IP address
of the remote server. Server Hostname or IP
Enter the port. Specifies the port on which the
remote server listens for client
connections. Server Port
Enter the IP address. Specifies the IP address of the
localhost. Localhost IP
Enter the port. Specifies the port on which JSAM
should listen for client application
connections. Client Port
Select the Create an access
control policy allowing SAM
access to these servers
check
box to enable this feature.
Allows access to the list of servers
specified in the Server Port column Create an access
control policy allowing
SAM access to these
servers
Select the Allow JSAM to
dynamically select an available
port if the specified client port
is in use
check box to enable this
option.
Allows JSAM to select an available
port when the client port you specify
is taken. The client application must
allow you to specify the port number
for the connection to use this option. Allow JSAM to
dynamically select an
available port if the
specified client port is
in use
Settings > Lotus Notes > Autopolicy: SAM Access Control > Rules tab
Enter the name. Specifies the name of the policy. Name
Enter the application resource
name. Specifies the application server to
which this policy applies. Resources
Select either Allow or Deny from
the Action drop–down list.
Allows or denies user access to the
resources. Action
Copyright © 2010, Juniper Networks, Inc. 94
Configuring Secure Access Devices Guide