Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 290 / 340

Table 78: Configuring General Network Settings Details (continued)
Your Action Function Option
Enter the primary DNS IP
address. Specifies the primary DNS IP address. Primary DNS
Enter the primary DNS IP
address. Specifies the secondary DNS IP address. Secondary DNS
Enter a comma delimited list of
DNS domains; The Secure
Access device searches for them
in the order that they are listed. Allows you to specify the default DNS
domain name for the individual Secure
Access device appliance. New DNS
Domain(s)
Enter the name or IP address of
a local or remote WINS. Allows you to specify the name or IP
address of a local or remote Windows
Internet Naming Service (WINS) server
that you use to associate workstation
names and locations with IP addresses
(if applicable). WINS
Windows networking tab
Select Windows networking tab
> Enable network discovery
(allows detection of Windows
share folders)
to enable this
option.
Enables the Secure Access device to
discover shared Windows folders. Enable network
discovery (allows
detection of
Windows share
folders)
Enter the master browser name. Allows you to select a WINS server,
domain controller, or other server within
the Secure Access device domain that
responds to NETBIOS calls and
associates workstation names and
locations with IP addresses (if
applicable). Master Browsers >
Name
Related
Documentation
Configuring Internal Ports (NSM Procedure) on page 273
•
•
Configuring Hosts (NSM Procedure) on page 275
Copyright © 2010, Juniper Networks, Inc. 272
Configuring Secure Access Devices Guide