Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 183 / 340

3.
Click the Configuration tab and select Authentication > Auth Servers . The
corresponding workspace appears.
NOTE: If you want to update an existing server instance, click the
appropriate link in the Auth Server Name box and perform the Steps 5
through 8.
4.
Click the New button. The New dialog box appears.
5.
Specify a name to identify the server instance.
6.
Select Local Authentication from the Auth Server Type list.
7.
Configure the server using the settings described in Table 41 on page 165.
8.
Click one:
•
OK —Saves the changes.
•
Cancel —Cancels the modifications.
Table 41: Secure Access Local Authentication Server Instance
Configuration Details
Your Action Function Option
Local Auth Settings
Set the minimum character length
for passwords. Specifies the minimum character
length for passwords. Minimum password
length (characters)
Set the maximum character length
for passwords.
NOTE: The maximum length
cannot be less than the minimum
length. There is no maximum limit
to the length.
Specifies the maximum character
length for passwords.
NOTE: This is optional.
Maximum password
length
Set the minimum number of digits
that is required in the password. Specifies the minimum number
of digits that is required in the
password. Minimum number of
digits required in the
password (digits)
Set the minimum number of letters
that is required in the password. Specifies the minimum number
of letters that is required in the
password. Minimum number of
letters required in the
password (letters)
Select Local Auth Settings >
Require passwords to have a mix
of UPPER and LOWER CASE
letters
to enable this option.
Specifies if the password must
contain both uppercase and
lowercase letters. Require password to
have a mix of UPPER
and LOWER CASE
letters
Select Local Auth Settings >
Require password to be different
from username
to enable this
option.
Specifies if you want users to set
the password to be different from
the username. Require password to be
different from
username
165 Copyright © 2010, Juniper Networks, Inc.
Chapter 11: Configuring Authentication and Directory Servers