Juniper NETWORK AND SECURITY MANAGER, Manual

Page: 293 / 340

Related
Documentation
Configuring Hosts (NSM Procedure) on page 275
•
•
Configuring Internet Protocol Filters (NSM Procedure) on page 276
Configuring Hosts (NSM Procedure)
You can configure hostnames in NSM that the Secure Access device can resolve to IP
addresses. This feature is useful when:
• Your DNS server is not accessible to the Secure Access device.
• You use WINS to access servers within the LAN.
•
Your corporate security policy does not allow internal servers to be listed on an external
DNS or requires that internal hostnames are masked.
To configure hosts:
1.
In the NSM navigation tree, select Device Manager > Devices . Click the Device Tree
tab, and then double-click the Secure Access device for which you want to configure
hosts.
2.
Click the Configuration tab, and select System > Network Settings > Hosts . The
corresponding workspace appears.
3.
Add or modify settings as specified in Table 80 on page 275.
4.
Click one:
•
OK —Saves the changes.
•
Cancel —Cancels the modification.
Table 80: Configuring Host Details
Your Action Function Option
Settings tab
Enter the IP address. Specifies the IP address of the hostname. IP
Enter a comma delimited list of
hostnames. Specifies the hostnames that the Secure Access device
can resolve to the IP address. Name(S)
Enter the comment. Allows you to enter a comment of 200 words or less
(optional). Comment
Related
Documentation
Configuring Internet Protocol Filters (NSM Procedure) on page 276
•
275 Copyright © 2010, Juniper Networks, Inc.
Chapter 18: Configuring Network Settings