Juniper NETWORK AND SECURITY MANAGER Page 323 Manual Download

Page: 323 / 340

CHAPTER 23

Configuring Logs in Secure Access Devices

•

Configuring User Access, Admin Access, Events and Sensors (NSM
Procedure) on page 305

•

Configuring Custom Filters and Formats for Log Files (NSM Procedure) on page 308

•

Configuring Client-Side Logs (NSM Procedure) on page 310

•

Configuring Custom Log Filters (NSM Procedure) on page 311

Configuring User Access, Admin Access, Events and Sensors (NSM Procedure)

To configure user access, admin access, sensors, and events:

In the NSM navigation tree, select

Device Manager > Devices

. Click the

Device Tree

tab, and then double-click the Secure Access device for which you want to configure
user access, admin access, sensors, and events.

Click the

Configuration

tab, and select

System > Log/Monitoring

. The corresponding

workspace appears.

Add or modify settings as specified in Table 89 on page 305 to configure user access,
admin access, sensors, and events.

Configure syslog servers where you want to store your log files as specified in Table
90 on page 308.

Click one:

•

—Saves the changes.

•

Cancel

—Cancels the modification.

Table 89: Configuring User Access, Admin Access, Sensors, and Events
Details

Your Action

Function

Option

Events > Settings tab

Specify the file size.

Specifies the maximum file size for the local
log file.

NOTE: The system log displays data up to
the amount specified. (The limit is 200
MB).

Max Log Size
(MB)

305

Summary of Contents for NETWORK AND SECURITY MANAGER

























































































































































































































































































































Search results

Summary of Contents for NETWORK AND SECURITY MANAGER

Reviews:

Related manuals for NETWORK AND SECURITY MANAGER

Brands by name

Popular brands

Juniper NETWORK AND SECURITY MANAGER, Manual

Search results

Summary of Contents for NETWORK AND SECURITY MANAGER

Reviews:

Related manuals for NETWORK AND SECURITY MANAGER

Brands by name

Popular brands