Juniper NETWORK AND SECURITY MANAGER Manual Download Page 331

Page: 331 / 340

CHAPTER 24

Viewing Logs in Secure Access Devices

•

Viewing Device Status on page 313

•

Viewing Device Monitor Alarm Status on page 316

•

Monitoring the Secure Access as an SNMP Agent (NSM Procedure) on page 317

Viewing Device Status

Table 94 on page 313 lists and describes device information that you can view through
the Device Monitor.

Table 94: Device Status Information

Description

Column

Unique name assigned to the device in NSM.

Name

Domain in NSM in which the device is managed.

Domain

Model number of the device.

Platform

Operating system firmware version running on the device.

OS Version

313

Summary of Contents for NETWORK AND SECURITY MANAGER

























































































































































































































































































































Search results

Summary of Contents for NETWORK AND SECURITY MANAGER

Reviews:

Brands by name

Popular brands

Juniper NETWORK AND SECURITY MANAGER, Manual

Search results

Summary of Contents for NETWORK AND SECURITY MANAGER

Reviews:

Brands by name

Popular brands