DIGISPENSE 3020 CONTROLLER MODULE
Page 3-99
7 April, 2011
IVEK Corp.
P03L011B
Table 3.3 Commands
Command Response
Description
a => Autoload
a or a0
a0,<value2>
a0,<value2>
a0,<value2>
Returns current Load Operation setting.
Load Operation.
<value2>:
0 = Manual
1 = Empty (default)
a1
a1,<value2>
2
= Every
a1,<value2>
a1,<value2>
Returns current MCV Conserve Mode setting.
MCV Conserve Mode.
<value2>:
0
= disabled
a2
a2,<value2>
1
= enabled (default)
a2,<value2>
a2,<value2>
Returns current Autotrigger Mode setting.
Autotrigger Mode.
<value2>:
0 = Disabled (default)
1
= Count
a3
a3,<value2>
2
= Infinite
a3,<value2>
a3,<value2>
Returns current Autotrigger Count setting.
Autotrigger Count.
<value2>:
2
= minimum (default)
a4
a4,<value2>
65535 = maximum
a4,<value2>
a4,<value2>
Returns current Autoreload Count setting.
Autoreload Count.
<value2>:
0
= minimum (default)
b => BEGIN
65535 = maximum
b or b0
b0,0
b1
b1,0
Begin Production Mode operation.
c => CLEAR FAULTS
Begin Fluidic Mode
operation.
c or c0
c0,<value2>
d => DIRECTION
Clears all faults and
reference pump.
d or d0
d0,<value2>
d0,<value2> d0,<value2>
Returns current Production Mode direction setting.
Sets the Production Mode fluid direction.
<value2>:
0
= Reverse
d1
d1,<value2>
1
= Forward (default)
d1,<value2> d1,<value2>
Returns current Fluidic Mode direction setting.
Sets the Fluidic Mode fluid direction.
<value2>:
0
= Reverse
e => END
1
= Forward (default)
e or e0
e0
