DIGISPENSE 3020 CONTROLLER MODULE
Page 3-4
7 April, 2011
IVEK Corp.
P03L011B
3.
DIGISPENSE 3020 CONTROLLER MODULE
3.1
DESCRIPTION
The Digispense 3020 Controller Module, hereafter referred to as the Controller Module, contains all the control,
monitoring, and interface components for the dispensing operations. The Controller Module measures 210mm (8
1/4" ) wide, 292mm (11 1/2") deep, 146mm (5 3/4") high (feet included) and weighs approximately 4.3 kilograms (9.5
pounds). The operator controls and interface connections are located on the front and rear panels.
3.1.1 Front Panel Controls And Indicators (Figure 3.1)
The front panel contains the operator interface for controlling the system. The following items are located on the front
panel.
1. Function Push-buttons
5.
Stop Push-button
2. Display
6.
Idle Indicator
3. Start Push-button
7.
Arrow Push-buttons
4. Active Indicator
8.
Enter Push-button
3.1.1.1 Function Push-buttons (Figure 3.1 Item 1)
These push-buttons change the value or initiate the operation for the item displayed directly above the push-button.
3.1.1.2 Display (Figure 3.1 Item 2)
This alphanumeric liquid crystal display is sixteen lines of forty characters each. The Controller Module status is
shown on upper right hand corner of the display.
3.1.1.3 Start Push-button (Figure 3.1 Item 3)
This push-button begins the pumping operation. The LED above the push-button illuminates when the pump is
operating.
3
4
5 6
2
7 (4)
8
1 (4)
Figure 3.1 Digispense 3020 Controller Module Front Panel
