DIGISPENSE 3020 CONTROLLER MODULE
Page 3-12
7 April, 2011
IVEK Corp.
P03L011B
Screen
Description
Change Permission
Allows changing the Permission level.
Dispense
Displays total volume, total cycles, recipe # and pump size. Allows changing
direction, dispense volume, dispense rate, load rate. load threashold and draw-
back settings.
Drawback
Allows changing drawback volume, drawback rate and drawback dwell.
Enter New Value
Used for entering a numerical value.
Fault
Displays the current fault.
Meter
Displays total volume, total cycles, recipe # and pump size. Allows changing
direction, dispense/meter rate, load rate, load threshold and drawback settings.
Prime
Displays volume primed, recipe # and pump size. Allows changing direction,
volume, discharge rate and intake rate.
Power up
Displays the current recipe number and pump size.
Recipe
Used for saving a new recipe or retrieving an existing recipe.
Select New Value
Used for selecting a new value from a list.
Setup A
Displays recipe # and pump size. Allows changing production mode, fluidic setup
mode, load mode, auto retrigger, production dwells, power-up permission and
current permission.
Warning Recipe Exists
Appears when you try to save a recipe using a previously used number.
POWER UP SCREEN
PRIME SCREEN
DISPENSE or
DRAWBACK SCREEN
METER SCREEN
These screens open when
a recipe button is pressed.
RECIPE SCREEN
WARNING RECIPE
EXISTS SCREEN
SETUP A SCREEN
CHANGE PERMISSION
SCREEN
This screen opens when
This screen opens when
you press Enter to select
you press Enter to change
a value from a list.
a numerical value.
SELECT NEW VALUE
ENTER NEW VALUE
SCREEN
SCREEN
This screen opens when
a fault occurs. Returns to
Setup A screen.
FAULT SCREEN
Figure 3.3 Standard Use Screen Navigation
