DIGISPENSE 3020 CONTROLLER MODULE
Page 3-65
7 April, 2011
IVEK Corp.
P03L011B
3.3.8.12 Setup C Screen
Supervisor
D = Display
P = Push-button Accessible
I/O Test
C = Display/Change N = Not Accessible/Viewable
Operator
0
SETUP C
<— status —>
2
3
PUMP = ##############
4
PUMP CHAMBER VOLUME = ############
5
6
ENCODER = ############
7
PUMP 90 DEG OFFSET = ############
8
ACTIVE PORT = ################
9
VALVING SPEED = ################
10
11
TORQUE = #################
12
ACCELERATION = ###################
13
if configured and NOT faulted and NOT reference required
14
SETUP B
SYSTEM
REFERENCE
CLEAR
15
SCREEN
INFO
TOTALIZER
OR if faulted
14
SETUP B
SYSTEM
FAULT
CLEAR
15
SCREEN
INFO
SCREEN
TOTALIZER
OR if NOT configured
14
SETUP B
SYSTEM
CLEAR
15
SCREEN
INFO
TOTALIZER
OR if reference required
14
SETUP B
SYSTEM
REFERENCE
CLEAR
15
SCREEN
INFO REQUIRED TOTALIZER
OR if permission less than supervisor
14
SETUP B
SYSTEM
REFERENCE
15
SCREEN
INFO
----- Displays the Controller Module Status........
D D D
----- Display/change the pump size .................... D D C
----- Displays the pump chamber volume ........... D D D
----- Switches to the encoder screen.................. D D C
----- Display/change the pump 90 degree offset . D D D
----- Display/change the active port ................... D D D
----- Display/change the valving speed .............. D D C
----- Display/change the torque .......................... D D C
----- Display/change the acceleration ................. D D C
The following screens are accessible from
this screen based on the system status.
Setup B ............................................................. P P P
System Info ....................................................... P P P
Clear Totalizer ................................................... P P P
Fault
.................................................................. P P P
