IVEK DIGISPENSE 3020, Manual

Page: 13 / 117

DIGISPENSE 3020 CONTROLLER MODULE Page 3-13
7 April, 2011 IVEK Corp.
P03L011B
3.2.7.1 Power Up Screen
Supervisor
D = Display P = Push-button Accessible I/O Test
C = Display/Change N = Not Accessible/Viewable Operator
0
DIGISPENSE 3020
<— status —>
2
3
4
IVEK CORPORATION
5 http://www.ivek.com
6
7
RECIPE = ##
8 PUMP = ####
9
10
11
12
Press function button below to proceed
13
if prime mode and dispense mode
14 PRIME DISPENSE CONTRAST
15 SCREEN SCREEN ADJUST
OR if agitate mode and dispense mode
14 AGITATE DISPENSE CONTRAST
15 SCREEN SCREEN ADJUST
OR if bubble clear mode and dispense mode
14 BUBBLE CLR DISPENSE CONTRAST
15 SCREEN SCREEN ADJUST
OR if disabled fluidic setup mode and dispense mode
14 DISPENSE CONTRAST
15 SCREEN ADJUST
OR if prime mode and meter mode
14 PRIME METER CONTRAST
15 SCREEN SCREEN ADJUST
OR if prime mode and disabled production mode
14 PRIME CONTRAST
15 SCREEN ADJUST
OR if disabled fluidic setup mode and disabled production
mode
14 SETUP A CONTRAST
15 SCREEN ADJUST
OR if NO actuator/pump selected
14 PRIME DISPENSE SETUP C CONTRAST
15 SCREEN SCREEN SCREEN ADJUST
OR if actuator/pump selected and reference required
14 PRIME DISPENSE REFERENCE CONTRAST
15 SCREEN SCREEN REQUIRED ADJUST
if - faulted
14 FAULT CONTRAST
15 SCREEN ADJUST
----- Displays the Controller Module Status ........ D D D
----- Displays the current recipe ......................... D D D
----- Displays the pump size .............................. D D D
The following screens are accessible from
this screen based on the system status.
Agitate ............................................................... P P P
Bubble Clr.......................................................... P P P
Contrast Adjust .................................................. P P P
Dispense ........................................................... P P P
Fault .................................................................. P P P
Meter ................................................................. P P P
Prime ................................................................. P P P
Setup A ............................................................. P P P
Setup C ............................................................. P P P