ITT Industries PumpSmart PS200, Configuration & Operation Manual

Page: 52 / 159

PS200 Configuration & Operation Guide
MULTI PUMP-PROCESS CONFIGURATION
Page 50
NOTE – For Multi-Pump applications with a common suction
header, one flow switch may be wired in series to the other
PS200 units. For Multi-Pump systems with individual suction
sources, a separate flow switch is required for each pump to
enable protection.
25.06 SECONDARY PROTECT A
KEY SEQUENCE
[From parameter group 22.13 TX CONFIG]
OR
Scroll to parameter group
25 PUMP PROTECT
OR
Scroll to parameter group
25.06 SECONDARY
PROTECT A
ENTER
Press to enter the
parameter setting mode
OR
Scroll to the desired
response mode
Secondary protect
utilizes a process switch
into connection DI-4 to
warn of no-flow
conditions. Once wired,
select:
ALARM & CONTROL
ALARM
ENTER
Press to complete the
entry
ACT PAR FUNC DRIVE
ENTER
1 L
Æ
1 0 0 0 P S I G 0
2 5 P U M P P R O T E C T
6 S E C O N D A R Y P R T C T A
A L A R M & C O N T R O L