ITT Industries PumpSmart PS200, Configuration & Operation Manual

Page: 112 / 159

PS200 Configuration & Operation Guide
APPENDIX A-1 KEYPAD USE
Page 109
Table 6 - How to set the contrast of the display
Step Function/Description Key Sequence Display after key is pressed
1
To enter the Function Mode Selection
FUNC
1 L
Æ
0.0 rpm 0
UPLOAD <=<=
DOWNLOAD =>=>
CONTRAST 0
2
To select a function.
OR
1 L
Æ
0.0 rpm 0
UPLOAD <=<=
DOWNLOAD =>=>
CONTRAST 0
3
To enter the contrast setting mode
ENTER
1 L
Æ
0.0 rpm 0
CONTRAST [0]
4
To set the contrast
OR
1 L
Æ
0.0 rpm 0
CONTRAST [7]
5
To send a new value to the drive
To cancel the new setting and keep the
original value press one of the mode
keys PRIOR to pressing the ENTER key.
The selected Keypad Mode is entered
ENTER
ACT PAR
FUNC DRIVE
OR
1 L
Æ
0.0 rpm 0
UPLOAD <=<=
DOWNLOAD =>=>
CONTRAST 7
1 L
Æ
0.0 rpm 0
UPLOAD <=<=
DOWNLOAD =>=>
CONTRAST 0
DRIVE
DRIVE SELECTION MODE
In normal use the features in Drive Selection Mode are not required for the PS200. The software release date can be
found by pressing the DRIVE key. The display will appear as follows:
A C S 8 0 0 0 0 0 6 _ 5 S R
I T T G O U L D S P S 2 0 0
V E R S I O N 4 . 0 0
I D – N U M B E R 1
The software version and date can be found in parameters 99.01 and 99.02, respectively.